Hi,
I have a 2 page report but when I print it, it prints 4 pages with 2 blank pages in between.
I am sure that the text, line etc are fitted in each page and no overlapping. Can you advise
what causing this? I am using Infomaker 2017.
Thanks
Arthur
-
Arthur Castro
- InfoMaker
- Wednesday, 19 August 2020 13:30 PM UTC
Comment
- John Fauss
- Monday, 24 August 2020 13:40 PM UTC
Do you have access to another (different make/model) printer? If so, try printing to it. All printers are not alike. You say you are sure all of the content being printed is within the page boundaries...does that take into account the minimum print margins that are inherent in nearly all printers. If the content being printed exceeds the printable page area supported by the printer by even the tiniest amount, you will get extra blank pages.
If still no luck resolving the issue, I would make a copy of the report/DataWindow to experiment with. Then, look for blank or empty text objects (select all objects and temporarily change the background color to green or red, for example). Look for lines, columns or other objects that come anywhere CLOSE to the right margin, then one by one, delete or move them, testing after each change. If you find the problem, you can then make the necessary change(s) to the real report.
Good luck!
If still no luck resolving the issue, I would make a copy of the report/DataWindow to experiment with. Then, look for blank or empty text objects (select all objects and temporarily change the background color to green or red, for example). Look for lines, columns or other objects that come anywhere CLOSE to the right margin, then one by one, delete or move them, testing after each change. If you find the problem, you can then make the necessary change(s) to the real report.
Good luck!
There are no comments made yet.
- Page :
- 1
There are no replies made for this question yet.
However, you are not allowed to reply to this question.
However, you are not allowed to reply to this question.
I would follow John's suggestion and look for objects outside the A4 dimensions and also upgrade to IM2017R3 to see that cures the problem.
Regards ... Chris